Condition not statedin stockDispatches in 5 DaysBMT20
CMITech BMT20 Dual IRIS Scanner
CMITechBMT20
Cmitech Bmt 20. Specifications below are read directly from the manufacturer's BMT-20-Datasheet datasheet. Each value carries the page of the document it came from.
₹19,000INR
Domestic price, shown in INR. Export pricing uses our separately maintained USD base.
Compliant GST tax invoice
1 Year Standard Warranty
Export paperwork handled
Drivers and SDK on request
Technical reference
Specifications
Cmitech Bmt 20. Specifications below are read directly from the manufacturer's BMT-20-Datasheet datasheet. Each value carries the page of the document it came from.
Capture & sensor
Performance characteristics| Single sensor design | The proprietary and patented single sensor design interleaves left |
|---|---|
| Dedicated, on-board image | In real-time coordination with the host PC software, the on-board |
| processor supports very high | image processor facilitates very high speed image capture, resulting |
| speed, simultaneous capture of | in the fastest and most robust capture of both of the subject’s irises at |
| subject’s irises | the same time. Typically, both irises are captured within one half (0.5) |
| Wide inter-pupillary distance | The BMT-20 can capture iris image pairs from subjects with inter-pu |
| External color LED positioning | The BMT-20 can be operated in two modes: either by the subject or |
| Position sensor | A position sensor detects if the system is upside down, preventing |
| Image output | Meets or exceeds ISO 19794-6 standard |
| MTF / spatial resolution | Exceeds 4.0 lp/mm @ > 60% contrast |
| Pixel resolution | 18.4 to 20 pixels/mm |
| Iris image pixel resolution | 640 x 480 pixels |
| Interface | USB 2.0 High Speed |
Hardware & interface
Connectivity & power| Internal white LED | Internal white light emitting diodes (LEDs) are turned on just prior 11000101011000101000110 to |
|---|---|
| IR illumination for iris imaging | Dual LED: wavelengths of 850 nm nominal |
| Internal LED for pupil contraction | Broadband visible (white) |
| External LED indications for operator | Red: Device position is too high |
| Power | USB 2.0 (500 mA at 5V) |
| Other certifications | CE , FCC, USB-IF, India STQC, RoHS, WHQL |
Environmental
Operating limits| Meets IP64 specifications for | Meeting this very high standard means that the BMT-20 is highly |
|---|---|
| positioning rest | bright light, including direct sunlight, from entering the optical path |
| High temperature range | The tested and certified operating temperature range of the BMT-20 |
| Operating temperature range | 0 to 50˚C |
| Humidity | 10 to 90% RH, non-condensing |
| Ingress protection | IP64 |
Physical
Size & weight| Extended depth of field | The BMT-20 is capable of imaging over a depth of 30 mm, making |
|---|---|
| parts | pupillary distance and depth of field without needing any moving |
| Dimensions | 219 x 161 x 58 mm (8.6 x 6.3 x 2.3 inches) |
| Unit weight | 680 g (1.5 lbs) |
| Optical path distance | 350 to 380 mm |
| Depth of field | 30 mm (1.2 inches) |
| Inter-pupillary distance range | 40 to 90mm (1.6 to 3.5 inches) |
Data & formats
Interchange standards| State-of-the-art optical design | The optical design includes utilizing highest quality optics and long |
|---|---|
| Eye safety standard | IEC 62471, IEC 60825-1 |
Other
Additional detail| Long internal optical path | The optical design is folded within the BMT-20 system, providing the |
|---|---|
| tolerance | pillary distances as small as 4.0 cm, which is the minimum distance |
| All solid-state design—no moving | The superior optical design of the BMT-20 provides the widest inter |
| particulate intrusion prevention | resistant to contamination by the very small airborne particles such |
| Near-real time off-axis gaze | Capturing the correct position of the eyes is essential for optimal iris |
| detection | biometrics. The system automatically detects subject gaze angle |
| Motion detection | System detects eye motion relative to the system, and waits until sub |
| Foldable side visors and forehead | Side visors and the forehead positioning aid on the BMT-20 block |
| indicators | a trained operator. Subjects are given short and easy to understand |
| assisted positioning | Blue: Device position is too low |
| PC hardware requirements | PC/x86 platform: Intel® Atom™ or above processor |
Assurance
Certifications & standards
Standards and approvals named in this product's published specification.
CE marking FCC RoHS USB-IF WHQL STQC ISO/IEC 19794
Certification documents are issued for the exact model and firmware shipped. Request the certificate pack for this item from the export desk before rollout.
For buyers outside India
Export & compliance
What is confirmed at the point of order, and what the proforma settles in writing.
HSN / ITC classification
84716050
Classified on record. Confirm the final rate on your invoice.
Package dimensions & weight
Net 0.8 kg · Gross 1.05 kg
Bare and packaged weights are itemised in the weight table below.
Port of loading & courier
IN DEL 4 — New Delhi Air Cargo
Standard export hub. Courier and CSB-V clearance are confirmed per shipment.
Country of origin
India
Preferential origin documentation available on request.
Bare unit weight
0.8 kg
The device itself, as stated in the manufacturer's datasheet. This is not what the parcel weighs.
Packaged weight
1.05 kg
Estimated from the datasheet plus protective packing. We have not weighed this one ourselves.
Volumetric weight
On request
Calculated once the outer carton dimensions are recorded.
Billable weight
On request
Confirmed with the courier at the point of quotation.
Drivers, SDKs and compliance documents are issued on request
Software packages are released per model and platform by the manufacturer and are not shipped with the unit. Tell the export desk which platform and firmware you need and we will send the matching package.
Before you order
Frequently asked
Is this currently available?
This item is listed as in stock. Dispatch is typically 5 Days.
What does the warranty cover?
1 Year Standard Warranty against manufacturing defects. Extended cover and on-site swap are available for fleet deployments.
Which payment methods are accepted for export orders?
International cards, international wire via SWIFT / TT, and domestic UPI or cards for INR orders.
Is GST charged on export orders?
No. Export supplies ship zero-rated under LUT; domestic orders carry GST with a compliant tax invoice.
Do you supply across India and for export?
Yes. We ship domestically and handle export documentation including IEC, GST and LUT requirements for international destinations.
Considered together
Related products
Need a formal quote?
Volume pricing applies automatically at each tier. For a formal proforma, a staged delivery schedule or an integration consultation, request a quote and the export desk responds within 24 hours.
Engineer support
Talk to a named engineer before you order — device fit, SDK build and rollout planning.
Mon–Sat, 10:00–19:00 IST